To Pin In Place On The Frame





Place the outer edge of the straw even with the outer edge of the brim,

beginning at the center back, allowing three inches to extend to the

right. Pin in place and baste all the way around until the center back

is reached. Curve the second row gradually up from the center back; do

not make an abrupt curve, until the correct lap is reached, usually

one-eighth of an inch. There will be found a thread at the edge of most

braids which may be pulled up to take out the extra fullness when sewed

on a curve. The outside edge of the first row must be left free for the

edge of the fabric, which covers the other side, to be slipped under. Do

not begin sewing until the second row is basted in place.





To Piece Braid To Put A Straw Hat Into Shape facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback