To Cut Side Crown From Buckram





Remove the pins from the seam, allowing pins in slashes to remain. Lay

pattern flat on smooth side of buckram, lengthwise of the material to

take advantage of the natural roll. Cut close to pattern; lap the ends

one-fourth inch. Sew, using a fine back stitch close to each edge; this

makes two rows of stitching. Sew a piece of frame wire to top and bottom

of side crown, keeping all joining at back. Use same method as in sewing

edge wire on brim. Cover both wires with crinoline.





To Cover With Braid To Cut Wire facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback