Tailored Lining





This lining is rather the most popular lining used. Large firms send

their material away to be made up for their trade and the linings may be

bought ready-made, but almost every one has pieces of silk which may be

easily made into one of these linings.



Cut an oval of crinoline two-thirds as large as the top of crown, baste

a piece of silk lining over this. Pin this on top of the crown, as this

can best be fitted on the outside and should be done before the hat is

made. Now cut a piece of bias material long enough to reach around the

bottom of the crown wide enough to meet this crown tip at all points.

After pinning it to the crown tip, turn up one-quarter of an inch at the

bottom and pin to the bottom of the crown. Stretch snugly because the

inside of the crown is smaller; pin the fullness to the crown top all

around, gather between pins, and baste in place. Stitch on the machine.

This seam may be corded or a small cord sewed on to cover the seam.



Linings may be made of taffeta, china silk, satin, sateen or of almost

any material which is not too heavy. When a wire frame is covered with

thin material and the frame shows through, the hat should have a thin

lining. If the hat is covered with maline, use a maline lining; if with

georgette, a georgette lining should be used.





Tailored Bow Tie facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback