French Lining





This lining is made from an oval piece of silk which corresponds to the

crown measurements. Measure the crown from front to back and from side

to side, adding one inch to these measurements. Fit a small wire to the

inside of the hat at the headsize and tie. Lap the edge of the silk over

the wire one-quarter of an inch. Gather the silk close to the wire using

a small running stitch. After completed, pin in place and slipstitch to

the crown. This lining will reduce the headsize of any hat somewhat, so

it should never be used if there is any danger of making the hat too

small for the head.





Frames Of Neteen And Crinoline Geraniums facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback