Frames Of Neteen And Crinoline





Lay the pattern on the neteen in such a way as to bring the bias where

the greatest amount of roll is to be, then cut making the same

allowances as if cut from buckram. This material should be used double

to secure the best results. Cut one thickness first and pin this on

another piece in such a way that the warp thread of one piece will lie

parallel to the woof thread of the other. Cut the two pieces the same

size and before removing the pins baste closely all over the brim with

fine thread, making one inch stitches. Fine thread should be used for

this as a coarse thread might show through the covering.





Frame Or Brace Wire French Lining facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback