Covering Wire Frames With Maline Net Or Georgette





Wire frames which are to be covered with sheer material, such as maline,

net, or georgette, must be carefully made, as the wire frame becomes a

part of the design, and the wire should be silk covered.



If maline is used, it should be pleated or gathered on, unless the brim

is of the halo style, for which directions are given elsewhere. Four or

five thicknesses of maline are necessary. The material is often gathered

in small quarter-inch tucks at the points where the tuck may be sewed to

the circle wire on the brim or the crown. A small tuck at the edge wire

would make a softer looking edge than if put on plain. The fullness is

then gathered in and sewed to the headsize wire. If the edge is left

plain, a few rows of lacey-looking braid may be sewed on the edge. A

wide tuck hanging down from the edge is sometimes used and it is very

becoming to certain types of faces. The wires of a frame are often first

wound with narrow bias pieces of net or maline. The edges are turned in

and the material wrapped on smoothly and evenly. Sometimes the wires are

wound with a contrasting color.



An effective covering for any frame may be made from ribbon or bias

strips of satin or silk, velvet or georgette, or any soft fabric. If a

wire frame is used, it must first be covered with a thin plain material

to serve as a foundation to which the ribbon or strips of material may

be sewed, or a frame of neteen or crinoline may be used if a very soft

hat is desired.





Covering Turbans Crinoline facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback