Bias Fabric





If bias strips of silk or satin are used, the material should be cut in

strips two and one-half inches wide, on a true bias, and joined in one

long strip. Fold lengthwise through the middle and gather the raw edges

together a little less than one-quarter of an inch from the edge. This

is sewed to the frame the same as braid, the folded edge overlapping the

raw edge and the thread drawn up to adjust it as it is pinned and sewed

in place. This is an excellent way to use up old material.





Base Wire For Crown Blocking Over Wire Frames facebooktwittergoogle_plusredditpinterestlinkedinmail

Feedback